1986 Toyota Hiace
for GTA: Vice City and GTA3

Includes two dffs: with and without new wheels

Created by: Juha "Turpuli" Laaksonen
e-mail: turpuli@hotmail.com or turpuli@mbnet.fi
website: http://storm.prohosting.com/turpuli/index.html
	 http://koti.mbnet.fi/turpuli  (in finnish!)

Release date: 17th August 2004


---------------------------------------------------
===================================================
============ INSTALLATION INSTRUCTIONS ============
===================================================
---------------------------------------------------
If you already know how to install the car, open readme.txd!


NOTE: you can use DMagic1's wheelmod with this!
You can get it from Dmagic1's website:
http://dmagic1wheelmod.main-page.com/
or from any major GTA 3/VC site.

Recommended cars to replace:
in GTA3: pony
in Vice City: pony

---------------------------------------------------
===================================================
=============== TABLE OF CONTENTS =================
===================================================
---------------------------------------------------
1. Car settings
  1.1. For Vice City
  1.2. For GTA3
2. Installation instructions for Vice City
  2.1. Installing mesh and textures (.dff and .txd)
  2.2. Installing car settings
  2.3. Installing collision file (.col)
3. Installation instructions for GTA3
  3.1. Installing mesh (.dff)
  3.2. Installing textures (.txd)
  3.3. Installing car settings
  3.4. Installing collision file (.col)
4. Stuff



---------------------------------------------------
===================================================
=============== 1. Car settings ===================
===================================================
---------------------------------------------------

===================
1.1. FOR VICE CITY:
===================


handling.cfg:
 
2200.0 2.3 5.0 2.3 0.0 0.1  0.0  85  0.97 0.77 0.51 5 150.0 24.0 R P 8.5   0.45 0 30.0  1.25 0.09 0.2  0.50 26000 0.20 -0.22 0.4  0.5		0000021		0  1



The last two fields of default.ide:

with new wheels (use pony.dff):  249, 0.74
without new wheels (use nowheels.dff):  252, 0.74



carcols.dat:

1,37, 48,48, 1,75, 77,77, 85,85, 18,74, 16,72, 49,49



==============
1.2. FOR GTA3:
==============


handling.cfg:

2200.0 2.3 5.0 2.3 0.0 0.1  0.0  85  0.97 0.77 0.51 5 150.0 24.0 R P 8.5   0.45 0 30.0  1.25 0.09 0.2  0.50 26000 0.20 -0.22 0.4		0000021		0  1



The last two fields of default.ide:

with new wheels (use pony.dff):  089, 0.74
without new wheels (use nowheels.dff):  162, 0.74



carcols.dat:

1,37, 48,48, 1,75, 77,77, 85,85, 18,74, 16,72, 49,49



---------------------------------------------------
===================================================
=== 2. Installation instructions for Vice City ====
===================================================
---------------------------------------------------

You need these programs:

- Notepad (or any other text editor)

- IMG Tool
  you can find it from any major GTA 3/VC site
  (for example: gta-action.com, www.theborggaming.com)

- Steve-M's CollisionFileEditor
  Get it from Steve's homepage:
  http://people.freenet.de/steve-m
  or any other colfile editor (no instructions for
  them here, though)

Of course you can choose not to install the new
collision files but that's not recommended.


NOTE:
REMEMBER TO BACK UP THE ORIGINAL FILES BEFORE INSTALLATION!
And remember to uncheck "read only" for the entire GTA VC
folder and every file in it.


In this little guide I'm using pony as an example.
You don't have to replace pony if you don't want to.
You can replace any car with this if you use the new
collision file!


==================================================
2.1. Installing mesh and textures (.dff and .txd):
==================================================

1. Open IMG Tool.  Open gta3.img with it.
   (File > Open)
   The gta3.img is located in "GTA VC/models"

2. Back up pony.dff and pony.txd by extracting them.
   (Edit > Find / Find Next)
   (Commands > Extract)
   Then delete pony.dff and pony.txd from the .img
   (Commands > Delete)

3. Add pony.dff and pony.txd from the folder where
   you have unzipped the zip file.
   (Commands > Add)


Done!


=============================
2.2. Installing car settings:
=============================

1. Back up handling.cfg, default.ide and carcols.dat
   They are located in "GTA VC/data"

2. Open handling.cfg in Notepad.  Search for pony.  Replace the
   line of numbers between words "PONY" and "MULE" with the
   line above.  (look at 1. Car settings > GTA VC > handling.cfg)

3. Open default.ide in Notepad.  Search for pony.  Replace the
   two last fields in the line (by default: 252, 0.7) with these:
   249, 0,74
   (249 is the id number of the wheel and 0,74 is the size of the wheel)

4. Open carcols.dat in Notepad.  Search for pony.  Replace the
   numbers with these: 
   1,37, 48,48, 1,75, 77,77, 85,85, 18,74, 16,72, 49,49

Done!


======================================
2.3. Installing collision file (.col):
======================================

1. Back up vehicles.col.
   It's located in "GTA VC/models/coll"

2. Open Steve-M's Collision File Editor.  Load vehicles.col in it.
   (File > Load)

3. Search for pony and then click it.  Now click "Replace" on the
   right.  (or Coll > Edit > Replace)
   Find and open hiacecol.col.

4. Now you should have a new box titled "Replace Collision Object"
   in front of you.  Select the only item on the list and click
   "Replace".

5. Save.  (File > Save)

Done!
Now you have everything installed!  Just run GTAVC and enjoy!  ;)



---------------------------------------------------
===================================================
====== 3. Installation instructions for GTA3 ======
===================================================
---------------------------------------------------

You need these programs:

- Notepad (or any other text editor)

- IMG Tool
  you can find it from any major GTA 3/VC site
  (for example: gtawip.com, www.codenamevice.co.uk)

- Steve-M's CollisionFileEditor
  Get it from Steve's homepage:
  http://people.freenet.de/steve-m
  or any other colfile editor (no instructions for
  them here, though)

Of course you can choose not to install the new
collision files but that's not recommended.


NOTE:
REMEMBER TO BACK UP THE ORIGINAL FILES BEFORE INSTALLATION!


In this little guide I'm using pony as an example.
You don't have to replace pony if you don't want to.
You can replace any 2-door car with this if you use the
new collision file!


============================
3.1. Installing mesh (.dff):
============================

1. Open IMG Tool.  Open gta3.img with it.
   (File > Open)
   The gta3.img is located in "GTA3/models"

2. Back up pony.dff by extracting it.
   (Edit > Find / Find Next)
   (Commands > Extract)
   Then delete pony.dff from the .img
   (Commands > Delete)

3. Add pony.dff from the folder where
   you have unzipped the zip file.
   (Commands > Add)

Done!


================================
3.2. Installing textures (.txd):
================================

1. Open IMG Tool.  Open txd.img with it.
   (File > Open)
   The txd.img is located in "GTA3/models"

2. Back up pony.txd by extracting it.
   (Edit > Find / Find Next)
   (Commands > Extract)
   Then delete pony.txd from the .img
   (Commands > Delete)

3. Add pony.txd from the folder where
   you have unzipped the zip file.
   (Commands > Add)

Done!


=============================
3.3. Installing car settings:
=============================

1. Back up handling.cfg, default.ide and carcols.dat
   They are located in "GTA3/data"

2. Open handling.cfg in Notepad.  Search for pony.  Replace the
   line of numbers between words "PONY" and "MULE" with the
   line above.  (look at 1. Car settings > for GTA3 > handling.cfg)

3. Open default.ide in Notepad.  Search for pony.  Replace the
   two last fields in the line (by default: 162, 0.7) with these:
   089, 0,74
   (089 is the id number of the wheel and 0,74 is the size of the wheel)

4. Open carcols.dat in Notepad.  Search for pony.  Replace the
   numbers with these:
   1,37, 48,48, 1,75, 77,77, 85,85, 18,74, 16,72, 49,49

Done!


======================================
3.4. Installing collision file (.col):
======================================

1. Back up vehicles.col.
   It's located in "GTA3/models/coll"

2. Open Steve-M's Collision File Editor.  Load vehicles.col in it.
   (File > Load)

3. Search for pony and then click it.  Now click "Replace" on the
   right.  (or Coll > Edit > Replace)
   Find and open hiacecol.col.

4. Now you should have a new box titled "Replace Collision Object"
   in front of you.  Select the only item on the list and click
   "Replace".

5. Save.  (File > Save)

Done!
Now you have everything installed!  Just run GTA3 and enjoy!  ;)



---------------------------------------------------
===================================================
=================== 4. Stuff ======================
===================================================
---------------------------------------------------

You may upload this to your site if you want but
only if you don't chance the contents of the zip 
file in any way!  And please do send me an e-mail
if you add this to your site!  I insist!  :)

If you want to 
 - modify and release the modified car
 - convert the car to another game
 - make the car a part of some mod
e-mail me and ask for permission first!  I might not
answer in the same day or even in the same week, though.
